全自動焊接設備與其他焊接設備相比，該自動焊接設備具有更高的自動化程度，其所有部件均選自高質量的原始設備，并且操作非常簡單方便。

Compared with other welding equipment, the automatic welding equipment has a higher degree of automation. All its components are selected from high-quality original equipment, and the operation is very simple and convenient.

使用全自動焊接設備的注意事項：

Precautions for using automatic welding equipment:

1.焊槍電纜不要壓得太緊，彎曲角度也不能太小。送絲軟管的半徑不應小于150mm，否則內部電纜會損壞，可能導致事故。焊接期間請勿更改電壓調試開關。

1. The welding gun cable should not be pressed too tightly and the bending angle should not be too small. The radius of the wire feeding hose shall not be less than 150 mm, otherwise the internal cable will be damaged, which may cause accidents. Do not change the voltage commissioning switch during welding.

2.在焊接操作過程中，請勿觸摸帶電部件，例如焊接機的輸出接口。

2. During the welding operation, do not touch the live parts, such as the output interface of the welding machine.

3.更改或調試面板旋鈕時，請勿過分用力。自動不銹鋼管焊接機可能會損壞設備。

3. Do not use excessive force when changing or adjusting the panel knob. Automatic stainless steel pipe welding machine may damage the equipment.

4.每次焊接之前，請檢查焊接機的連接是否正確以及接地線是否可靠。

4. Before each welding, please check whether the welding machine is connected correctly and whether the grounding wire is reliable.

全自動焊接設備工作速度較快，深度較大，不易變形?？梢酝瑫r進行多束加工和多工位加工，使焊件更加準確。但是，全自動焊接機的安裝不是那么簡單。山東數(shù)控焊接設備廠家提醒您，在安裝之前，要有一個良好的安裝環(huán)境，并且要執(zhí)行相應的保護。更多相關內容就來我們網站http://www.meangen.com咨詢吧！

Full-automatic welding equipment is fast, deep and not easy to deform. Multi-beam processing and multi-station processing can be carried out at the same time to make the weldment more accurate. However, the installation of automatic welding machine is not so simple. Shandong CNC welding equipment manufacturer reminds you that before installation, there should be a good installation environment and corresponding safety protection should be implemented. Come to our website for more relevant content http://www.meangen.com Ask!