1、焊接溫度以及電氣故障帶電情況會對造成一些威脅。操作工要穿戴防護用品。

1. Welding temperature and electrical fault electrification can pose some threats. Operators should wear protective equipment.

2、防止發生焊接意外。操作工不可以閑談，設備運行的同時要注意觀察焊接情況。

2. To prevent welding accidents. Operators are not allowed to chat casually, and attention should be paid to observing the welding situation while the equipment is running.

3、防止他人隨意操作。離開崗位前和下班前要關閉電源和氣源。

3. Prevent others from operating at will. Turn off the power and gas sources before leaving the job and before leaving work.

4、防止電源或電線受損發生意外.自動焊接專機周圍要避免雜物。

4. Prevent accidents caused by damage to the power supply or wires. Avoid debris around the automatic welding machine.

5、防止觸電通電情況下不可以自行打開數控控制箱及各種線路。

5. To prevent electric shock and power on, it is not allowed to open the CNC control box and various circuits by oneself.

6、及時上報聯系山東焊接專機廠家，遇到焊接問題。做出方案才可調整。

6. Timely report and contact the Shandong welding machine manufacturer if encountering welding problems. Only by making a plan can adjustments be made.

7、調整好位置防止精度受到影響，設備要確定平穩。

7. Adjust the position to prevent accuracy from being affected, and ensure that the equipment is stable.

8、斷電檢查其工作情況。送絲裝置或者送料裝置出現故障要及時停止。

8. Power off and check its working condition. If the wire feeding device or material feeding device malfunctions, it should be stopped in a timely manner.

9、焊接平臺需要定期清理，為了確定焊接精度。防止粘上油污等。

9. The welding platform needs to be cleaned regularly to determine the welding accuracy. Prevent sticking oil stains, etc.

自動焊接專機的注意事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.meangen.com咨詢吧！

That's all we need to know about the precautions for the automatic welding machine. We hope you can be helpful. For more information, please visit our website http://www.meangen.com Consult!